Tubing for in between the rinse station and the peripump, and from the peripump to the rinse and waste bottles. 1 – 144” Long 5/32” ID 7/32” OD 3 – 16” Long 5/32” ID 7/32” OD

The plexi-glass dust cover for the S25 reduces contamination of the sample from particulate matter, improving the reliability of the analysis, the performance of your S25 Autosampler and ensuring that the laboratory footprint of your autosampler remains the same.

This kit is recommended for use with organic solvents and comes with its own rinse station, allowing the quick change between aqueous and organic analysis. Purchase of this kit with an additional tray for your autosampler N0831037 or N0831038 for the S23 and S25 autosamplers respectively allows for a dedicated organics setup, providing a simple transfer between aqueous and organics samples.

The plexi-glass dust cover for the S23 reduces contamination of the sample from particulate matter, improving the reliability of the analysis, the performance of your S23 Autosampler and ensuring that the laboratory footprint of your autosampler remains the same.

The autosampler has a 3-channel peristaltic pump that accepts below listed tubes when running inorganic acids. 2 – 2 mm ID Pharmx, Black Tabs, Rinse 1 – 3.2mm ID Pharmx, White Tabs, Waste

This CTFE Stator is for use with 爱游戏平台注册登录 's High Throughput System (HTS) in NexION 1000/2000 ICP-MS series instruments. It features a 0.75 mm inner diameter.

This PTFE Rotor is for use with 爱游戏平台注册登录 's High Throughput System (HTS) in NexION 1000/2000 ICP-MS series instruments. It features a 0.75 mm inner diameter.

This 250 μL Sample Loop is for use with 爱游戏平台注册登录 's High Throughput System (HTS) in NexION 1000/2000 ICP-MS series instruments. It features a 0.75 mm inner diameter.

This CTFE Fitting is for use with 爱游戏平台注册登录 's High Throughput System (HTS) in NexION 1000/2000 ICP-MS series instruments. It is the small tube extension to the Female Tubing Kit, 1/4-28 Fitting.

This ST Nebulizer Line is designed for connection to port 5 and features a 0.25 mm inner diameter. This Nebulizer Line is required for sample introduction when using 爱游戏平台注册登录 's High Throughput System.