燃燒頭係統

This is a Burner Drain Assembly for flame-equipped PinAAcle 500/900 and AAnalyst 100/200/300/400 Atomic Absorption (AA) instruments. The kit includes the complete drain assembly and a bottle. All components of the system was designed to be utilized with samples containing organic matrixes.

The holder will support a full flame burner assembly for a PinAAcle AA instrument. Can be used to properly hold and store the flame burner assembly without damaging workbenches or burner system components.

Required for the determination of refractory metals when using nitrous oxide-acetylene flames. Can also be used for air-acetylene. Can be rotated with most instruments to reduce sensitivity.

This flow spoiler is installed in the burner chamber and is compatible with 爱游戏平台注册登录 atomic absorption flame instruments Models 2280, 2380, 3030(B), 3100, 3110, 3300, 4000, 5000, and 5100 PC.

This burner head cleaning tool was designed to clean off any build up from the slots of the Atomic Absorption (AA) burner heads.

This single-slot burner head is for air-acetylene flames and is compatible with 爱游戏平台注册登录 atomic absorption flame instruments Models 2280, 2380, 3030(B), 3100, 3110, 3300, 4000, 5000, and 5100 PC.

This product includes 3 each of the Burner Head o-ring, inorganic end cap o-ring, and impact bead o-ring, 5 organic end cap o-rings, and 2 end cap/impact bead o-rings.

Includes three O-rings and one tube of Super O-lube

Replacement seal plug for the 00572615 Pyrex^® impact bead used with end caps of metal body nebulizers on AAnalyst Atomic Absorption (AA) instruments.

For use with seal plugs in end caps with impact bead (2 O-Rings required).

This End Cap Assembly, with Viton O-Rings, is for use with PinAAcle^® 500 and 900F/H/T/Z AA series instruments. Only includes end cap assembly, not complete nebulizer assembly.

This End Cap Assembly, with Viton O-Rings, is for use with PinAAcle^® 500 and 900F/H/T/Z AA series instruments. Only includes end cap assembly, not complete nebulizer assembly.

For instruments shipped before Fall 1999. Required when using high sensitivity nebulizer (P/N B0505480, B0505590).

This is a replacement Burner Mixing Chamber Assembly for flame-equipped PinAAcle AA instruments and includes the burner chamber, burner head O-ring (Viton) and burner head retaining ring.

To mount MHS-10 quartz cell on burner system. Allows mounting of the FIAS-100/400 Quartz Cell to Models 5100, 3030, 2380, 3300, 3110, 3100 and AAnalyst Series.

For use with seal plugs in end caps with impact bead (2 O-Rings required).

A different End Cap Assembly N0370392 is required for use with the High Sensitivity Nebulizer.

This is a replacement burner mixing chamber for the AAnalyst family of Atomic Absorption (AA) instruments. Note that this is for the burner mixing chamber only and does not include any other components of the burner system.

The 5 cm nitrous oxide burner head is required for nitrous oxide-acetylene operation. This burner head can also be used with air-acetylene or rotated to provide reduced sensitivity.

A 5 cm air-acetylene burner head is available for applications in which reduced sensitivity is required. It can be rotated to provide further sensitivity reduction, and it has a wide slot to prevent clogging.

The three-slot burner head is designed to be used when analyzing samples with high concentrations of dissolved solids. The three-slot burner head is not compatible with some older gas control systems.

The 10 cm burner head is designed to be used with the air-acetylene flame. Because of its long burner path length, it provides the best sensitivity for air-acetylene elements.