Fluorescence Consumables & Accessories

This optional accessory fits the Microplate Reader (N4201024). It controls the temperature of the microplates via circulating water. Achievable temperature range using this accessore with:

• a water bath: ambient to 100°C
• a Peltier Controller: -5 to 100°C

A thermostatting device, such as the Peltier controller (N4100040) or a water bath (B0080171), is required, but not included.

Fluorescence reference standards measure for signal to noise and spectrum corrections for the FL 6500 and FL 8500 spectrophotometers.

This Quartz SUPRASIL^™ Flowcell is used in Fluorimetry. It has the following specifications:

• Path Length: 10 mm
• Cell Volume: 440 µL
• Windows: 3
• Quantity: 1

Quartz SUPRASIL^™ cells are identified by a blue 爱游戏平台注册登录 logo.

The Continuous Wave Module with Upper Bracket and Mirror contains a 150 W Xenon Continuous Wave lamp, a bracket, and a reflection mirror. It comes from the factory as one pre-calibrated unit, enabling easy installation by the customer. This lamp is compatible with the FL 8500 spectrometer.

Please note, this lamp should only be ordered if the mirror has been broken, scratched or contaminated.

The Continuous Wave Module with Upper Bracket contains a 150 W continuous wave lamp and a bracket. It comes from the factory as one pre-calibrated unit, enabling easy installation by the customer. This lamp is compatible with the FL 8500 spectrometer.

The Dust Filters are 80 mm in diameter and come in a package of four. They are used with both the FL 6500 and FL 8500 spectrometers. For standard labs, we recommend changing every six months to ensure the health of the instrument and quality of the data.

The pre-calibrated Xenon Pulse Lamp with Silencer combines a power-selectable Xenon Pulse Lamp, bracket, and silencer into one unit, enabling easy installation by the customer. This lamp is compatible with the FL 6500 spectrometers.

The External Emission Filter has a set frequency of 665 nm. It is a round filter, 3 mm thick with a diameter of 12.5 mm. This filter is compatible with the FL 6500 and FL 8500 instruments

The External Emission Filter has a set frequency of 610 nm. It is a round filter, 3 mm thick with a diameter of 12.5 mm. This filter is compatible with the FL 6500 and FL 8500 instruments.

The External Emission Filter has a set frequency of 590 nm. It is a round filter, 3 mm thick with a diameter of 12.5 mm. This filter is compatible with the FL 6500 and FL 8500 instruments.

The Injection Port Kit includes a 100 µL syringe and is an optional accessory for the Biokinetics Accessory, which is compatible with the LS 45/50/50B/55 fluorescence spectrometers. With this part number, the injection port can be purchased separately.

The microplate reader accessory is used for DNA quantitation, enzyme-linked assays, protein measurements, cell viability testing, and drug research testing.

The Fluorescence standards assist with the day-to-day checks on reproducibility and wavelength calibrations of fluoroscopy spectrometers.

The Xenon Source Lamp uses a pulsed xenon discharge of 7.3 W average power at 50 Hz. This reliable source produces very little ozone or heat but provides remarkable sensitivity due to its peak intensity exceeding 1 KW. Compatible with the LS 30/40/50 spectrometers.