Gas Management

For use with 10-port valves.

This Dual-Stage High Purity Regulator is used with NexION 2000 ICP-MS series instruments. High-purity brass regulators are designed for use with analytical applications with non-corrosive gases. This regulator features a stainless steel diaphragm and a delivery pressure range of 0-50 psig. Dual Stage regulators will maintain a more constant outlet pressure - even as the pressure in the cylinder declines. So, if your application is one where gas flow is on for long periods, and pressure changes are not desirable - then you should choose a dual stage regulator.

This Dual-Stage High Purity Regulator is used with NexION 2000 ICP-MS series instruments. High-purity brass regulators are designed for use with analytical applications with non-corrosive gases. This regulator features a stainless steel diaphragm and a delivery pressure range of 0-50 psig.

This Dual-Stage Regulator is used with NexION 2000 ICP-MS series instruments. This regulator features a stainless steel diaphragm and barstock, as well as a delivery pressure range of 0-30 psig and CGA 660 fitting.. Dual Stage regulators will maintain a more constant outlet pressure - even as the pressure in the cylinder declines. So, if your application is one where gas flow is on for long periods, and pressure changes are not desirable - then you should choose a dual stage regulator.

The GMD 8000 allows mixing of up to three gases, delivering a custom gas environment to the TGA 8000™ or other devices.

For use with the Portable Electronic Gas Leak Detector (N9306089).

The FlowMark™ flowmeter provides real-time measurements of gas chromatography carrier gas streams ranging from 0.50 mL/min to 500 mL/min.

Includes tubing in multiple sizes.

For use with the Portable Electronic Gas Leak Detector (N9306089).

Supplied with 590-580 Adapter.

Shipped in a plastic tool box for convenient storage.

This Methane Regulator is for use with ICP-MS instruments. It is designed for general purpose, noncorrosive gas service and are recommended for use where constant delivery pressure is desired. It features a brass body and Neoprene diaphragm, as well as a maximum inlet pressure of 3000 psig.

Guarantees constant delivery pressure even when cylinder pressure varies. Two-stage regulator with brass body and stainless steel diaphragm. Maximum inlet pressure of 20,700 KPa. Supplied with CGA-540 adapter. Includes a Swagelok™ 1/4 in. NPT to 1/8 in. fitting which is used to attach the regulator to the purge gas tubing. Approximate weight: 1.3 Kg.

Two-stage regulator for precise outlet pressure control. Brass body and stainless steel diaphragm for long life and minimum maintenance. Maximum inlet pressure of20,700 KPa. Supplied with CGA-580adapter. Approximate weight: 1.3 Kg.

The Pneumatic Gas Regulator is a single-stage regulator with a neoprene diaphragm. It can be used to regulate Nitrogen, Helium, Argon, or air. Included is a CGA 590/580 inlet connector and a Swagelok Fitting, 1/4 in. NPT to 1/4 in. Maximum inlet pressure is 3000 PSI.

This two-stage regulator has a brass body and stainless steel diaphragm and guarantees constant delivery pressure regardless of variations in cylinder pressure.

CGA-350 fitting.

CGA-350 fitting.

This Nitrous Oxide Regulator is designed for use with AA instruments and gas cylinders with a CGA 326 connection. It provides pressure control from 350-520 kPA (50-75 psig) and contains an integral thermostatted heater to prevent freezing of the regulator diaphragm.

CGA-580 fitting.

The Regulator Install Kit makes it possible to set up a single source gas delivery system (instead of using two gas cylinders, one source and one purge gas) by installing a series of gauges off the regulator on the source gas.

Included in the kit are a rotary blower with capacitor and hardware, a vent to be located above the instrument, and an adapter to permit connection of the blower and vent with suitable metal tubing. The adapter and vent are made of stainless steel sheets.

* Notice: Local electrical codes do not permit 爱游戏平台注册登录 Service Engineers to install the blower and vent assembly.