Whether you're looking for quartz, nichrome or platinum hangdown wires, we have what you need for your thermal analysis. Our hangdown wires are available in three kits.
排序方式
1-12 的 12 產品與服務
The Quartz Hangdown Wire kit comes standard in the TGA 8000 Spares Kit, but with this part number, it can be ordered separately as a spare or replacement kit. Qty. 5 wires
The Hangdown Wire Alignment Tool is a U-shaped piece that attaches to the Hangdown Wire Tube on TGA Analyzers. It holds the alignment of the hangdown wire steady while a sample pan is placed on the hangdown wire. With this part number, this piece can be ordered as a replacement or spare part. Qty. 1
The nichrome Hangdown Wire is a nickel-chromium wire, 121 mm long and 0.24 mm in diameter. It is a straight wire, with a preformed hook at either end; one at a 30° angle, the other at a 65° angle. This kit contains 5 wires.
The PYRIS 1 TGA Hangdown Wire kit incudes five quartz wires with hooks on both ends. This design ensures that the wire connects to the balance ribbon and the sample pan stirrup at the same time. With this part number, these wires can be ordered as a replacement or spare set. These wires can be used with the TGA 8000 and the PYRIS TGA 1 analyzers. Qty. 5
The High Temperature Hanger Kit consists of 6 hangers, tubing, and a tubing plug. Each hanger is a straight wire, 7.8 mm long, with a hook, 3 mm long and at a 30° angle, formed at each end. Qty. 6
The Hangdown Wire Kit ships standard with the TGA 7 Sample Kit. It contains six nichrome straight wires, 4.43 in long, and six straight nichrome wires, 6.0 in long. Qty. 12
The Hangdown Wire Repair Kit consists of one Hangdown Wire Accessory and use instructions. This kit can repair one wire for the AD-2/AD-4/AD-6 Balance.
