Sample Holder Supplies

The ARTA includes a 60 mm integrating sphere detector, a built in polarized driver capable of measuring BRDF/BTDF with a variable slit and variable sample holder, and a GlanTompson polarizer. Sample measurement spot can be as small as 2x2 mm. Angles of incidence: 0-85° for Transmittance and 5-85° for Reflectance. Compatible with the LAMBDA 950/1050/1050+.

The Flexible Combusto-Cone is made of treated paper material. It is waterproof and has a volume of 2 µL. It is used to support liquid samples in combustion baskets. Dimensions and tolerancing conform to ASMD Standard Y14.M1994. Qty. 1000

For reflectance of thickness measurements 80° of light incidence.

For reflectance measurements 45° of light incidence.

The Specular Reflectance Kit is an optional General Purpose Optical Bench kit. It consists of six mirrors: two square flat mirrors with a magnesium fluoride overcoat, two concave mirrors, and two convex mirrors.

The kit allows the reference beam to be introduced into the sphere via a flexible fiber optic bundle. This eliminates the need to use mirrors to direct the reference beam into the sphere allowing a wider variety of geometry’s to be used.

The Downward Viewing 150 mm InGaAs Integrating Spheres allows for measurement the measurements of powders, granular materials, and large irregular geological samples in the horizontal position. This module is compatible with LAMBDA 650/850/850+/950/1050/1050+ spectrometers.

Compatible with LAMBDA 365/465 spectrometers, this Nano Stick-S, Z15 has a single sampling port and a center beam height of 15 mm. It has a pathlength of 0.5 mm, a cell volume of 2 µL, and fits in standard 10 mm cell holders. Color: Red

This Accessory Base Plate is required when installing the Fixed Angle Reflectance Accessory on the LAMBDA 365 spectrometer.

The Micro Cell Holder is designed to accurately position small volume cells. It can also accommodate any standard 10 mm cell or Nano Stick. This holder is compatible with the LAMBDA 365 spectrometer.

The Variable Angle Reflectance Holder Accessory Base Plate is required when installing the Variable Angle Reflectance Holder (B0137314) on the LAMBDA 365 spectrometer.

Compatible with LAMBDA 365/465 spectrometers, this Nano Stick-D, Z15 has dual sampling ports and a center beam height of 15 mm. It has a pathlength of 0.5 mm, a cell volume of 2 µL, and fits in standard 10 mm cell holders. Color: Blue

Compatible with LAMBDA 365/465 spectrometers, this Nano Stick-D, Z15 has dual sampling ports and a center beam height of 15 mm. It has a pathlength of 0.5 mm, a cell volume of 2 µL, and fits in standard 10 mm cell holders. Color: Black

The Variable Pathlength Cuvette Holder holds cells with pathlengths of 5, 10, 20, 30, 40, 50, or 100 mm. This cell holder is compatible with LAMBDA 365 spectrometers.

The Standard Cell Holder accommodates rectangular cells up to 10 mm path length. This holder is compatible with the LAMBDA 20/30/40/20Bio/30Bio/40Bio/40P/25/35/45/ 650/750/850/850+/900/950/1050/1050+ spectrometers.

This holder accommodates test tubes, vials, ampules, and cylinder type cuvettes from 11 to 17 mm in diameter.

The Low-E Microscope Slides are 1 x 3 inch optical quality glass with infrared reflective coating. They are 1 mm thick to allow visible observations and infrared reflectance measurements. These slides are available for reorder with this part number. Qty. 25

The Rectangular Long Path Cell Holder is a single cell holder that accommodates rectangular cells with path lengths from 10 mm to 100 mm..

The ICRA Liquid Reflector comes standard in the NIRA Transflectance Liquids Sampling Accessory kit. With this part number, this reflectors are available as a replacement or spare part. Qty. 100

The Lens Assembly Kit is an optional General Purpose Optical Bench kit. It allows you to focus a beam on a small spot using several plane convex lenses and iris diaphragms.

Compatible with LAMBDA 265 spectrometers, this Nano Stick-D, Z8.5 has dual sampling ports and a center beam height of 8.5 mm. It has a pathlength of 0.5 mm, a cell volume of 2 µL, and fits in standard 10 mm cell holders. Color: Black.

Compatible with LAMBDA 265 spectrometers, this Nano Stick-S, Z8.5 has a single sampling port and a center beam height of 8.5 mm. It has a pathlength of 0.5 mm, a cell volume of 2 µL, and fits in standard 10 mm cell holders. Color: Red

The Variable Angle Sample Holder is designed to hold solid samples such as films, glass, and transparent samples at a variety of angles. This holder supports transmission analysis on samples with a minimum size of 30 x 40 mm. Angle Range: 0-60°. This holder is compatible with LAMBDA 20 / 30 / 40 / 20Bio / 30Bio / 40Bio / 40P / 25 / 35 / 45 / 650 / 750 / 850 / 850+ / 900 / 950 / 1050 / 1050+ spectrometers.

This Single Cell Solid Sample Holder is an optional cell holder that can accommodate a maximum sample size of 10 x 15 mm and a maximum thickness of 5 mm.

The HP LAMBDA Linear Cell Changer transports sample and reference positions for the high performance LAMBDA spectrometers. Cell holders are required, but not included. Your choice of recommended cell holders (2 of each) is the 5-Position Long Path length cell holder (B0089439) or the 8-Position, Water-Thermostattable cell holder (B2205411).