Sort by
1-15 of 15 Products & Services
The Aluminum Standatd Expansion 5 mm by 3 mm D is an aluminum reference material for the expansion calibration of the TMA 4000.
The Aluminum Standatd Expansion 10 mm by 3 mm D is an aluminum reference material for the expansion calibration of the TMA 4000.
The silicone O-Ring is used in the Swing-Away Cover of the DSC 7 and DSC 4 analyzers. It has an inner diameter of 2.050 in and is 0.103 in wide. Qty. 1
The AccuPik Sample Pan Sealer Accessory is used to crimp the covers onto AccuPik aluminum sample pans. It ships with a base sealer, a volatile sealer, and a replacement upper die and lower die.
The TGA 7 High Temperature Furnace Anti-Convection Extension Tube is made of stainless steel and is 1.25 in long with a diameter of 0.342 in. With this part number, it can be ordered as a replacement or spare part.
The Furnace Thermocouple Kit consists of two thermocouple accessories. With this part number, you can order these units as replacement or spare parts.
The Replacement Furnace Assembly is a small replacement oven that is 15 mm in diameter and has a maximum operating temperature of 1000°C. With this part number, it can be ordered separately as a replacement or spare.
The Balance Tare Weight for the TGA 7 Furnace Balance is a disk weight standard, 0.273 inches on diameter. The disk has an attached hook, 0.263 inches long. The weight is used as a standard to calibrate the TGA 7 furnace balance. With this part number, it can be ordered separately as a replacement or spare.
The O-Ring has a 1.475 in inner diameter and is 0.21 in wide. This o-ring ships with the TGA 8000 O-Ring Kit (N5320115). Qty. 1
The Nickel Reference Material is a 2-in long wire of solid nickel (Ni) with a magnetic transition temperature of 355.3°C. Includes a Certificate of Analysis. This reference material ships standard with the TGA 8000 Calibration Standards Kit (N5320201). Qty. 3