UV/Vis Optics | 爱游戏平台注册登录 - 爱游戏登录网,爱游戏平台注册登录
爱游戏平台注册登录

UV/Vis Optics

When samples are oriented and polarize incident light, it is important to correct for the inherent polarizing effect of the spectrometer’s optics by using a depolarizer. Another important application is to make measurements using a specific orientation of incident radiation e.g. for crystalline materials and polymers.

產品與服務 (21)
Filters:

篩選條件

全部展開 全部折疊
產品類型
  • Accessories (15)
  • Consumables (6)
長度
溫度-最高
溫度-最低
產品組
  • Depolarizers & Accessories (5)
  • Fiber Optic Accessories (8)
  • GPOB (3)
  • Polarimetry Cells (4)
  • Sample Holders & Supplies (1)
體積

排序方式

1-21 的 21 產品與服務

  • 爱游戏平台注册登录

    Polarimetry Cell Stopper - 6 mm

    This Polarimetry Cell Stopper is made of teflon, is 10 mm long, and has a diameter of 6 mm.
  • 爱游戏平台注册登录

    Sample Compartment Window Set

    The Sample Compartment Window Set is a matched pair of sample compartment windows for the LAMBDA 25/35/45 spectrometers.
  • 爱游戏平台注册登录

    Vis/NIR Monofibers

    The Vis/NIR Monofibers are a pair of monofibers, 2 by 2 meters each with a range of 400-2400 nm. They are required by the Transfer Optic Accessory (B0509546 and L6020290). Qty. 1 pair

  • 爱游戏平台注册登录

    Polarimetry Cell Stopper - 3 mm

    This Polarimetry Cell Stopper is made of teflon, is 10 mm long, and has a diameter of 3 mm.
  • 爱游戏平台注册登录

    Flowcell for Polarimetry

    The Flowcell for Polarimetry cell is made of special optical glass, has a 5 mL volume capacity, and a 100 mm path length. It is highly efficient, thermostattable, and has no birefringence effects. It is easy to fill and empty with no loss of sample.

  • 爱游戏平台注册登录

    Pluggable Female Coupling

    The Pluggable Female Coupling is a female snap-on hose connector used when thermostatting polarimetry cells. This connector fits all of our polarimeters.
  • 爱游戏平台注册登录

    Transmittance Sample Holder Kit

    The Transmittance Sample Holder Kit is an optional General Purpose Optical Bench (GPOB) accessory. This holder positions samples on an angle to the incident beam to effect transmittance measurements. This accessory can accommodate a maximum sample size of 1 cm thick x 10 cm square. The holder is mounted on a magnetized base.
  • 爱游戏平台注册登录

    Transfer Optic Accessory

    The Transfer Optic Accessory is a monofibers holder for the LAMBDA 20/40/20Bio/40Bio/25/35/45 spectrometers. This accessory accommodates a pair of monofibers, either 2- or 10-meters long. Other optrodes are available upon request.

  • 爱游戏平台注册登录

    Short Focal Length Mirror

    The Short Focal Length Mirror Kit consists of a short focal length (20-30 mm) concave mirror on an adjustable base with magnetic mounts to allow for small spot incidence of curved samples.

  • 爱游戏平台注册登录

    Sample Holders Kit

    The Sample Holders Kit is an optional kit for the General Purpose Optical Bench Accessory. This kit includes two cantilever sample holders mounted on magnetic bases.
  • 爱游戏平台注册登录

    Fiber Optic Probe Tip - 5 mm

    This Fiber Optic Probe Tip is used with Fiber Optic Dip Probe (N1016070). It has a 5 mm path length. This tip must be ordered separately.

  • 爱游戏平台注册登录

    Fiber Optic Probe Tip - 2 mm

    This Fiber Optic Probe Tip is used with Fiber Optic Dip Probe (N1016070). It has a 2 mm path length. This tip must be ordered separately.

  • Double Polarizer Drive

    The Double Polarizer Drive is installed inside the primary sample compartment of high-performance LAMBDAs, i.e., the 650/750/850/850/950/1050/1050+ spectrometers. Its orientation can be fully automated, allowing scans at a fixed wavelength or in a stepped mode. It has a scanning resolution of 25°. When in stepping mode, the polarization (depolarization) orientation can be changed up to 20 wavelength positions.

  • 爱游戏平台注册登录

    Glan-Taylor Polarizer Crystal

    The Glan-Taylor Polarizer Crystal is a mounted 15 mm UV/VIS polarizer crystal for use with the Double Polarizer Drive (B0505530). It has a wavelength range of 300 to 2600 nm. To ensure an equal energy level in the sample and reference beams, a second polarizer (B0505530 or B0501282) is necessary.

  • 爱游戏平台注册登录

    Transfer Optic Accessory for the Fiber Optic Dip Probe Kit

    The Transfer-Optic Accessory is a mono-fibers holder. It is a required component of the Fiber Optic Dip Probe kit (N1016070). This holder accommodates a pair of mono-fibers, either 2- or 10-meters long. Other optrodes are available upon request.
  • 爱游戏平台注册登录

    Light Shield for the Fiber Optic Dip Probe

    The Light Shield is one of the required components of the Fiber Optic Dip Probe Kit (N1016070), but it must be ordered separately.

  • 爱游戏平台注册登录

    Film Polarizer for the Double Polarizer Drive

    The Film Polarizer Element works with the Double Polarizer Drive (B0505530). This high performance film polarizer has a wavelength range of 400-700 nm. Other wavelength ranges are available upon request.

  • 爱游戏平台注册登录

    Fiber Optic Dip Probe for LAMBDA Spectrometers

    The Fiber Optic Dip Probe is a 15 mm, 316-grade stainless steel probe with a wavelength of 200 to 1100 nm. Probe tips must be ordered separately.

  • 爱游戏平台注册登录

    Depolarizer Crystal for the Double Polarizer Drive

    The Depolarizer Crystal works with the Double Polarizer Drive (B0505530) to optain depolarized light measurements from within the sample compartment of LAMBDA spectrometers. It has a wavelength range of 190-2600 nm and an efficiency rating of 98%. This crystal can be rotated up to 20 wavelength points to get a wavelength independent depolarization.

  • Common Beam Depolarizer for 爱游戏平台注册登录
 Lambda

    Common Beam Depolarizer

    The Common Beam Depolarizer allows for measurements with depolarized light from inside a LAMBDA's sample compartment. It has a wavelength range of 190 to 2600 nm. Its setup includes a stepper drive that is controlled by UV WinLabTM software. Installation by a 爱游戏平台注册登录 Service Engineer is required.
  • 爱游戏平台注册登录

    UV/Vis Monofibers

    The UV/Vis Monofibers are a pair of monofibers with a range of 250-900 nm. Each monofiber is 2 (L) x 2 (W) meters and has a 600 micron diameter. Standard SMA adapters are included. They are required by the Transfer Optic Accessory (B0509546 and L6020290). Qty. 1 pair
技術資源 (1)
Filters:

篩選條件

全部展開 全部折疊
活動
Baidu
map